How to Create Your Own Dog Mask – The Fundamentals

In this report we're going to look at how to make your own dog mask. We'll cover the basics and then go on to take a look at a number of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it's really very straightforward. All you've got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can't simply cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so that you get something which resembles a cone. The most important thing here is to be realistic with what type of paper plate which you're using.

Then you'll need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can make certain that nothing will leak once you place the mask on. Make sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the here edges so that it runs over the cardboard.

Don't worry too much about the paint getting stuck to your mask. It's easy to eliminate it later, and it'll leave you with a wonderful finished mask to show off to everybody! It's also a good idea to wash away any excess paint once you're done, so that you don't wind up with smudges or smears on your dog.

Then it's time to paste the mask on your dog's head. First you need to make sure that you have a secure fit between the mask and your dog's head. Once you've made sure that it is secure, then you may start to glue the mask on the dog's face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make certain it's quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it could look messy. As soon as you've done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are level and make sure that it is not too short or long as this will cause some issues with the mask slipping off the dog's face.

If you're using a dog mask because your pet security, you'll have to do some sanding to make certain it's safe on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.



Leave a Reply