How to Make Your Own Dog Mask – The Fundamentals

In this report we're going to examine how to make your own dog mask. We'll cover the basics and then go on to take a look at some of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you'll have to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what type of paper plate that you're using.

Then you'll need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Make sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don't fret too much about the paint getting stuck to your mask. It's easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everybody! It's also a good idea to wipe away any excess paint after you're done, so you don't end up with smudges or smears on your dog.

Then it is time to glue the mask on your dog's head. First you need to make sure that you get a secure fit between the mask and your dog's head. As soon as you've made sure that it is secure, then you can start to glue the mask onto the dog's face. Take the piece of cardboard that's used for the base of the mask and then fold it over. Be sure that it's quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you've got the mask snugged firmly onto the face of your dog. Don't make the folds too https://thetruthandtheway.org/?p=15729 large or else it could look messy. Once you've done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure that the ears are flat and be certain it's not too short or long as this can cause some issues with the mask slipping off the dog's face.

If you're using a dog mask because your dog protection, you will need to do some sanding to make certain it's secure on your dog. You can accomplish this by sanding off any excess paper that may have been eliminated from your mask.



Leave a Reply